Bluescreen sporadically , reading the memory.dmp and error cause

Today I have a solution to the problem from the topic Bluescreen Sporadically , Reading the Memory.DMP and cause of error:

Hi folks ,

Currently have the computer of my work colleague Here

SYS data

Freezer 64 pro
Gigabyte ga ds3p
AMD FX8350
GTX 1060
3 x 4gb DDR3 Crucial
San Disk SSD 128GB
LC POWER 6450GP2 v2. 2

The computer crashes sporadically and shows only a bluescreen, this can be read out and evaluated to locate the defective component.
MEMORY.DMP in the search enter on the partition where win10 is installed before at views the system files fade in otherwise nothing is shown.

Correct me if I have misunderstood something

the data from the bugcheck

The computer was restarted after a serious error. The error code was:
0x0000001e (0xffffffc00005, 0xfffff802f294f8be, 0x0000000000, 0x00000000028a01).
A full image was saved in: C:\Windows\MEMORY.DMP. Berichts-ID: 00000000-0000-0000-0000-000000000000.

+ System

– EventData

param1 0x0000001e (0xffffffc00005, 0xfffff802f294f8be, 0x0000000000, 0x00000000028a01)
param2 C:\Windows\MEMORY.DMP
param3 00000000-0000-0000-0000-000000000000

I got another bluescreen for a change, but this time with the same shutdown code (SYSTEM_SERVICE_EXCEPTION) but with the error cause : win32kfull.sys

The kernel power errors have reappeared.

And a bug check:

The computer was rebooted after a serious error. The error code was: 0x0000003b (0x00000000c0000005, 0xffffd9a3f04ccde0, 0xffff908154ce3d50, 0x000000000000). A full image was saved in: C:\Windows\MEMORY.DMP. Berichts-ID: b8c27f66-8dcc-4ccb-b3fb-27f69fc6b553. Thumbnails of attached graphics

Moin, / pack the dmp and upload it somewhere else.

Error cause Broadcom NFC Proximity Provider (WLAN?)

Windows 10: Bluescreens again and again without minidump
I selected kernel memory image, coincidentally came a few minutes after again a bluescreen (KERNEL_DATA_INPAGE_ERROR hidusb.sys), which in turn got stuck at 0%. Neither a Memory.dmp in C:/Windows, another minidump in C:/Windows/Minidump
created. Therefore I can’t read anything with BlueScreenView either.

Examine computer for malware

A common cause of problems with computers is malware infestation. This means a Trojan or a virus caused crashes, File error etc. First check if the computer is virus free. An installed virus scanner is no Guarantee that the Windows system is clean. Especially rootkits can only be unmasked with special tools and bluescreen sporadically , reading the memory.DMP and error cause remains until then.

Bluescreen error with ErrorCode

Bluescreens are symptoms of serious errors in the system. Among other things, these can be due to defective hardware, file system problems, incorrect drivers or malware problems (e.g.B. Rootkits) occur. How to fix bluescreen problems can be found here. Based on the error code that comes with the bluescreen (the blue screen when it crashes), you can deduce the causes. The most common cause of crashes:

  1. Software error, z.B. Memory leak
  2. Hardware errors, z.B. defective or incompatible hardware
  3. Driver errors, z.B. wrong or not suitable drivers for a component of the system.

Bluescreen sporadic, reading the memory.DMP and error cause fix – this is how it works

If the source of the error is unknown (for bluescreen sporadic, reading the memory).DMP and cause of error) is, these should be eliminated step by step. For this it is necessary to work through the points one after the other and not in parallel. It is best to write down directly what has already been executed and what the result was. This is important for help requests in forums and communities.

Crash through software

If software is responsible for the crash, it can also be analyzed with tools like WhoCrashed. How to do it is described here. This is also with Bluescreen Sporadisch, reading the memory.DMP and error cause probably.

Crash due to hardware (defective)

Defective hardware causes Windwows either to fail to communicate properly with the component or even to receive incorrect values back. How to analyze your hardware is described here.

Faulty drivers

When drivers don’t work properly it’s one of the most common causes of bluescreens. Problems with drives such as hard drives or SSDs can lead to reading problems and thus crashes. These Windows crashes can usually be fixed by reinstalling the drivers. How to remove the previous drivers properly before you learn here.

Drive with error does not work

Problems with drives like hard disks or SSDs or USB flash drives should be ruled out. Perform the following diagnostics and repairs to exclude errors. Keep in mind that errors on drives and disks can lead to data loss. In any case, an analysis should take place regularly (once a quarter) in order to avoid problems such as Bluescreen Sporadic , Reading the Memory.DMP and error cause prevent.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: